Fire Safety Audit in Bangalore: Questions Answered
Finished wall with a sealed service penetration
Questions answered · 5 min read

Fire Safety Audit in Bangalore: Questions Owners Ask, Answered

An audit is only useful if it finds something. The good ones go where nobody has looked for a while: shaft floors, ceiling voids, the back of a plant room.

By the Simfy Firesys team·Passive fire protection, Hyderabad
Finished wall with a sealed service penetration
Questions answeredA finished wall can hide an open penetration. An audit looks behind the finish.
The short answer

In Bangalore, a fire safety audit is a structured check of a building against the National Building Code 2016 Part 4, the approved fire drawings and the Karnataka rules that apply to it. It covers exits, active systems such as alarms and sprinklers, and passive protection such as fire doors, sealed shafts and protected steel. It should end with a ranked, photographed list of findings.

What does a fire safety audit in Bangalore cover?

A fire safety audit checks how well a building would protect people in a fire, against the National Building Code 2016 Part 4, the approved fire drawings and any Karnataka rules that apply. A complete audit has four parts: escape, active systems, passive protection and management. Below are the questions owners and facility teams in Bangalore ask us most, answered plainly. The audit is one step in the compliance cycle that our Bengaluru fire safety handbook lays out.

Audit scope

The four parts of a complete fire safety audit

Many audits cover the first two well. Ask how they cover the last two.

  1. Means of escapeExits, stairs, travel distances, signs, lighting.
  2. Active systemsAlarms, detection, sprinklers, hydrants, pumps, extinguishers.
  3. Passive protectionFire doors, compartments, sealed shafts and penetrations, steel.
  4. ManagementDrills, training, maintenance records, change control.
Ask for photosAn audit without photographs of findings is an opinion, not evidence.
The passive part is where most open findings are usually found.

When do I need one?

  • Before a fire NOC renewal or a clearance inspection
  • After a major fit-out or change of use
  • Before buying or leasing a building
  • When an insurer or lender asks
  • For hospitals, as part of the quarterly district audits described in the 2024 circular reported by Deccan Herald

For the approvals themselves, see our fire NOC guide for Bangalore.

Active or passive audit, which do I need?

Active auditPassive audit
ChecksAlarms, detection, sprinklers, hydrants, pumpsFire doors, compartments, shafts, penetrations, steel
MethodFunction tests, service recordsVisual survey of hidden areas, product evidence
Typical gapLapsed servicing, isolated zonesOpen shafts, unsealed cables, non-rated fills
Who usually does itFire systems contractors or consultantsPassive fire specialists or consultants

Source: Simfy Firesys audit practice. Most buildings need both. Many get only the first.

What should I get at the end?

A useful audit report lists each finding with a photo, its exact location, the risk level, the code clause or drawing it relates to, and a recommended fix. It should rank findings so you know what to fix first. Our guide to passive fire audit documentation shows a good format, and our fire safety audit checklist lists what to inspect.

The value of an audit is not the report. It is the fix list your contractor can work from on Monday morning.

How should I prepare for the auditor?

  • Arrange access to every shaft, plant room, roof and basement.
  • Have approved drawings and fire drawings ready.
  • Collect service records for alarms, pumps and sprinklers.
  • Gather certificates for fire doors, sealants and coatings.
  • Tell the auditor about recent fit-outs or changes.

What do I do with the findings?

Fix the high risk items first, especially open shafts and fire doors that do not close. Use tested products for every passive fix, not general fillers. Photograph each fix and add it to the record. Then plan the lower risk items into normal maintenance. Our tutorial on preparing a building for fire inspection walks through the passive fixes.

How do I choose an auditor?

Ask four questions before you appoint anyone. First, which parts will you cover: escape, active, passive and management, or only some? Second, will you open shafts and lift ceiling tiles, or only walk the corridors? Third, can I see a sample report, with real photos and locations? Fourth, are you independent of whoever will do the repairs, or will you quote for them too?

There is no wrong answer to the last one. Many owners prefer one firm that audits and fixes, because it saves a handover. Others want the audit separate so the findings are not shaped by the repair quote. What matters is that you know which arrangement you have, and that the findings are photographed so anyone can check them.

Are hospital audits different?

Hospitals hold patients who cannot always move, so compartments and fire doors matter even more. In Karnataka, a 2024 circular asked for quarterly district audits, and a January 2026 order set proportionate measures for hospitals below high rise height. Our note on the 2026 hospital fire order explains it.

Where we fit

We carry out passive fire audits, then fix what we find if you want us to. We are based in Hyderabad and work across South India. We do not audit active systems or issue NOCs, so for a full audit we work alongside your fire consultant and active fire contractor.

Sources:

Fire rules and their dates change, so confirm the current position with KSFES or your fire consultant before you act. Last reviewed 10 November 2026 by the Simfy Firesys team.

Questions people ask
?
What is a fire safety audit?A structured inspection of a building's fire safety against the applicable code, the approved drawings and good practice. It covers escape routes, active systems, passive protection and fire safety management, and ends with a list of findings and fixes.
?
Is a fire safety audit mandatory in Bangalore?It depends on the building and sector. Hospitals in Karnataka were told in a 2024 health department circular to expect quarterly audits by district committees, as Deccan Herald reported. Many owners also audit before NOC renewal and after major alterations.
?
What is the difference between an active and a passive fire audit?An active audit checks systems that act in a fire, such as alarms, sprinklers and pumps. A passive audit checks the built-in protection: fire doors, compartment walls and floors, sealed shafts and penetrations, and steel protection.
?
How long does a fire safety audit take?It depends on building size and access. A small office may take a day. A tower with many shafts and plant rooms can take several days, plus time for the report.
?
What should a fire safety audit report include?Each finding with a photo, its location, the risk level, the standard or drawing it relates to, and a recommended fix. A summary that ranks findings helps you plan the work.

Reading is the cheap part.

If any of this described your building, the next step is someone with a torch and a camera walking your risers.